 |
| 4 1/2 x 2 " cardboard |
So, I wanted to transition my first grade students from paper weaving to something a little more functional. I don't have enough of those big card board looms you purchase from the suppliers that are pre notched but I do have some donated heavy cardboard from a colleague. I decided to re purpose this into tiny looms for my students. First, I cut this up into 4 1/2 x 2" rectangles as shown on the left.
 |
| Holes punched along each side |
I added small punched holes on each end in an odd number. To attempt to space them fairly evenly without having to measure, I started with a hole in the center, one on each margin and then attempted to place one in the middle of each of those. I had marked my punch with a sharpie to attempt to line them up as evenly as possible.
 |
| Create slops for the warp threads |
Cutting from the edge, I cut to each hole to create a slot for the warp threads. I did the warp with some light weigh embroidery weight thread and gave students a plastic needle and yarn for their weaving. These are small enough that they can easily be completed in two class periods which is all we had left for the school year. It was a great re purpose of donated materials, an easy transition to traditional weaving and an easy take home to complete if students didn't finish before the end of the year. They can be taken off by cutting the warp threads on the back or can be left displayed on the loom.
 |
| A completed weaving |
